California-faucets Solima Widespread Faucet User Manual

Browse online or download User Manual for Water equipment California-faucets Solima Widespread Faucet. California Faucets Solima Widespread Faucet User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
CF-7002_ii_110914.doc Pg 1
Solimar
CF-7002
Widespread Lavatory Faucet
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure: 20 to 70 psi
*†
Maximum Flow Rate: 1.5 gpm
* Operating pressures between hot and cold supplies should vary no more than 30 psi.
If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING SPOUT TO SINK/DECK
Sink/Deck recommended hole size shall be Ø1-3/8”
Place O-RING (3) into BASE (2) and sliding BASE
(2) onto spout SHANK (1a)
Insert spout SHANK (1a) though sink/deck hole
Slide small O-RING (5) about half way down onto
LIFTROD (4). (this will allow liftrod to be in place
for mounting, but not interfere with tightening of
spout hardware)
Slide LIFTROD (4) through rear hole of BASE (2)
From underside, place SLOTTED WASHER (6)
onto spout SHANK (1a) and tighten SPOUT (1)
into place with NUT (7)
Insert RUBBER WASHER (8) into TEE (9) and
attach to spout SHANK (1a). TEE (9) should be
tighten to create watertight seal and positioned to
allow ease of attachment of valve hoses
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
Ø1-3/8”
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Solimar™

CF-7002_ii_110914.doc Pg 1 Solimar™ CF-7002 Widespread Lavatory Faucet Installation Instructions 1 IMPORTANT: Read all instructio

Page 2

CF-7002_ii_110914.doc Pg 2 2 3 INSTALLING VALVE • From underneath insert VALVE (10) though appropriate sink/deck hole IMPORTANT: VALVES (1

Page 3 - INSTALLING VALVE HOSES

CF-7002_ii_110914.doc Pg 3 4 5 INSTALLING HANDLE • Loosen SETSCREW (15a) from HANDLE (15) IMPORTANT: Handle BLADE (15b) shall be aligned wi

Page 4 - INSTALLING SUPPLIES LINES

CF-7002_ii_110914.doc Pg 4 6 7 INSTALLING DRAIN • Slide O-RING (5) below LIFTROD (4) threads • Attached LIFT KNOB (4a) onto LIFTROD (4) •

Comments to this Manuals

No comments